Tips on How to Fix a Leaky Faucet by Kaye Fretz
It is very crucial for you to learn how to fix a leaky faucet nowadays, especially with the high costs of getting a plumber, and with the nuisance that a leaking faucet brings. Now there’s no need for you to call a plumber and go through shock after shock upon receiving the high billing. Just go through these easy to follow and simple steps and you’ll be fixing that annoying leaky faucet in no time.
Learning how to fix a leaky faucet is actually very easy, as long as you are equipped with the right tools and materials. Basically, all you need is a new washer (preferably one that is suited to the faucet you have at home), some rags, a wrench, and a screwdriver (flathead and Philipps).
There are some things you should do before you start pulling your faucet apart. First, you should shut off the main water supply by shutting off the control valve. This can be found somewhere along the pipes under the sink. Turn the level or handle of the valve counter clockwise to switch it off.
Other than that, you also have to plug up the drain with the use of rags. By doing so, you are preventing small parts like washer and screws to go down the drain.
Once that is accomplished, you can now start repairing the leaky faucet. But first, be informed that these steps should be followed only when you have a conventional faucet. Other unconventional faucets might be more complicated, and you might use specific repair kits for it.
1. Just below the handle, where the faucet stem is attached to the water pipe, is a nut. Use a wrench to twist the nut counterclockwise to remove it. Turn the handle counterclockwise until you are able to remove it completely.
2. After you have removed the handle, you can then see a rubber-like washer that is probably very old, torn, dilapidated, and held down by a screw. This could be the reason why your faucet is leaking. Replace the old washer. Undo the old washer’s screws using your screwdriver and screw on a new washer. Remember that this new washer should be just of the same size with the old washer, to ensure compatibility and efficiency. Tighten the screws in order to secure the new washer in position.
3. Put everything back into place. Reinstall the faucet handle (clockwise, this time), and tighten the stem nut back to its original position.
4. After that, you can do the checking. Turn the water supply on and check whether the faucet still leaks. If it still leaks, you should probably tighten the screws more. Or, it could be that the faucet itself is defective, and not the washer. And if you think you really need it, seek professional help. Admit defeat and call a plumber.
So, there you have it. The easiest and simplest ways that will teach you how to fix a leaky faucet. By following these steps, you may never have to call another plumber again. You can say goodbye to ugly sink stains caused by long-standing drips, annoying dripping noises, and water wastage. All it takes is for you to learn these uncomplicated steps and you will never be helpless in dealing with a leaky faucet in your lifetime ever again.
Know more about how’>http://www.yourfaucetguide.com/”>howto fix a leaky faucet. All you need is fix’>http://www.yourfaucetguide.com/bathroom-faucet.html”>fixa leaky faucet guide!
Tags: faucet repair, fix faucet, fix leaking faucet, fixing leaky faucet